|
|
|
| Silencer | Chipping | K & N filter |
BMW Z1 Koni Dampers
When my rear shock absorbers sprung a leak, I replaced front and rear with Koni adjustables.
The front ones are part number: 8641-1021sport. These are adjustable from the top mount when fitted. You get a plastic 'key' with which you can adjust the settings. I find that the middle setting is firmer than standard, but not so as to rattle your teeth!
The rear konis are: 80-2522sport. These are also adjustable, but need to be detached at the lower end, extended fully to remove the internal bump stop, then compressed fully. The body of the damper is then turned to adjust the setting. Once the correct setting is found, fully extend to replace the internal bump stop, and then re-fit. Once again, I found the middle setting just right for normal road, and occaisional track use.
Konis can be obtained from:
